125mm (6″) 90 degree stove tee piece with cap
£99.00
In stock
SKU
125mm (5") 90 DEGREE T piece with cap Flue bend
125mm (6") 90 degree stove tee piece with cap
Not sure if this is the right fire for you?
Our 125mm (5") 90 degree T piece with cap flue bend is suited for solid fuel stoves. This single-wall tee piece component is designed to connect to the rear outlet of a stove, directing the flue system vertically and offer an access point for cleaning when you remove the included tee cap.
Our 125mm (5") 90 degree T piece with cap flue bend is made of heavy gauge steel that is welded to fully seal all joints, which prevents flue gas leakage and allows for proper flue gas flow. The height of this tee piece is 235 mm and is made to take a 125 mm (5 inch) male end flue pipe at the top. Deposits that form within the flue pipeline will fall into the lower tee section for easy clean out by removing the cap.
Meant for use internally within the home, this exposed pipe has two coats of high quality black enamel applied to both the inside and the outside the pipe. The paint finish is guaranteed to last for years and will look attractive in any room in your home.
This single-wall pipe is for internal use only and is not meant to pass through any surface. The black coating will enhance your room's decor and is made to match the finish on many stoves common in the UK.
Accessories Dimensions
Write Your Own Review
Customers Also Viewed